Use the wrong preset for a better sound - Musical Creativity 44

However, I love putting an ordinary audio track through a plug-in and working through the presets, especially those presets that it's not designed for.

The Concept

Calling it a concept is too way too grandiose really. Basically, take an instrument channel, e.g. guitar and apply presets for other instruments, e.g. piano, drums, etc. Some work, some don't. Either way, they'll get you thinking about the sound differently.

Work Through the List

With the signal-processing power at our fingertips and the flexibility provided by the plug-in architectures of Logic, Cubase, etc, it's easy to apply a processor, change it, remove it, try another and so on. Rather than reaching straight for the standards of eq, compressor or reverb with their respective expected settings for the instruments I'm processing, I'll sometimes put a different effect on, just to hear what it sounds like. If I don't like the result, I can undo the changes and be back where I was.

Waste of Time?

It's worked often enough that 5 minutes or so spent assessing the impact of different plug-ins can be useful, especially if I've hit a block. The more I play with the effects, the more I can predict the sound I'd get. So this tends to be for the effects I don't use as often (e.g. various auto-filters) or more extreme parameters of effects that I do use.

BlockFish

The best example of this I've ever come across is to insert a compressor on a vocal preset onto a drum mix signal chain.

Digitalfishphone.com's BlockFish provides a great example of this. Choose the "Close-up Vocal" preset - I'm doing this from memory so I may have the name wrong, but it should be obvious which preset I'm referring to. I used to use this when using Windows as my DAW's operating system. I remember there were some issues with no OS X version, but it looks like there may now be. Will have to give it a try, not sure if it's Universal Binary though.

Applying this preset immediately provides more energy and bite to the drums. If I wanted it a little more restrained, I'd patch the effect as a send and mix the return in to the required level. I remember slightly tweaking a few parameters to make it more suitable for drums, or at least the sound I was looking for. I think it was the Air Frequency and Air Level that were of most use. And of course, making it stereo since I'd be running a stereo drum-track through it.

OS X

In Logic 8, the Compressor effect can produce very similar results to the BlockFish effect. It doesn't have the same presets for the plug-in itself, so you'll have to play a bit more with it. In this case, changing the compressor type to Opto makes a drastic difference to drum-tracks. I'm not so sure I like it, I can hear the high-end clearer, but I can also hear too much compression, bordering on distortion with the optical variant, even after tweaking threshold and make-up gain for it to be more subtle.

Logic 8

Logic 8 has more emphasis on presets for channels rather than presets for plug-ins. On one hand, it makes the process of adding a preset chain of plug-in presets (yes, presets of presets) easier and it's a good way for learning how effects chain together. On the other hand, it's about chains of effects rather than a particular effect. In the end though, it's whatever works for you. There are still presets for plug-ins, the above image is the Compressor with a setting of Drum Kit Compression with the circuit type to Opto.